Bulks Go

The Ultimate Secret of Trends

Five Accidents that can Happen on a Building Site

Many of the things that we have in our modern times is down to the fact that we have machinery and equipment that can help us to do certain jobs. This can mean that things can be done more quickly or precisely – tools like tapping machines such as these https://www.cotswold-machinery-sales.co.uk/roscamat-tapping-machines/ , bandsaws and even drills are all things that help us to get jobs done.

However, it is also important that machines like this are used in as safe a way as possible, as even though tools are made to be as safe as possible, accidents can still happen, whether someone has not been trained to operate it correctly or is simply not paying attention.

Construction sites in particular are places where a lot of care should be taken and there should be a huge emphasis on safety, because lots of tools and machinery are used of course. Here are the most common accidents that can happen on construction sites…

Trips and Slips – Building sites will often have a lot of debris lying around them, uneven ground and surfaces, and working outdoors a lot of the time weather conditions can be bad. This is a cocktail for a slip or trip accident, which is why they occur commonly on building sites.

Image Credit

Falling from a Height – Because of the nature of the job, there are things that need to be done from a height. It is important to be safe and to be very aware of the height when you are working like this. Make sure that there are strict guidelines in place and that everyone is following them. From working on a roof to being up on scaffolding, a building site is a place that is highly likely to attract these sorts of accidents.

Accidents with Machinery – Machinery is used a lot in building work and the vast majority of the time it works well and helps to make the job a lot easier. However, using it incorrectly or a person who is un-trained to use it then using it can be very dangerous indeed. From vehicles to power tools all staff should be well trained before using any machinery on a building site.

Electrocution – In many cases, as work is being done to a building site there are going to be times when wiring is not finished, electrical wires are exposed, and power lines are running through an area where work is being done. It is important to be aware of these and where they are as electric shock can be deadly.

Image Credit

Being Crushed or Hit – Because of the large equipment moving around as well as building supplies, both crushes and being hit by objects or vehicles are something else to be aware of. It is also important to be aware of where things might fall from higher up.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.